Configuring Firewall Rules to Allow Incoming OVOC Traffic
If the device needs to communicate with
These OVOC-related firewall rules are required only if have configured other various firewall rules. If you are not using the device's firewall, the device allows all traffic by default and the below firewall configuration is not required.
Firewall Rules to Allow Traffic from OVOC
|
Index |
Source IP |
Source Port |
Prefix Length |
Start Port |
End Port |
Protocol |
Use Specific Interface |
Interface Name |
Action Upon Match |
Packet Size |
Byte Rate |
Byte Burst |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
0 |
Various rules for basic traffic. |
|||||||||||
|
... |
||||||||||||
|
N |
||||||||||||
|
N+1 (SNMP) |
<OVOC IP address> |
1161 |
32 |
161 |
161 |
udp |
Enable |
OAM_IF |
Allow |
0 |
0 |
0 |
|
N+2 (NTP) |
<OVOC IP address> |
123 |
32 |
0 |
0 |
udp |
Enable |
<interface configured for NTP> |
Allow |
0 |
0 |
0 |
|
N+3 (HTTP) |
<OVOC IP address> |
80 |
32 |
0
|
0 |
tcp |
Enable |
<interface configured for file transfer> |
Allow |
0 |
0 |
0 |
|
N+4 (HTTPS) |
<OVOC IP address> |
443 |
32 |
0 |
0 |
tcp |
Enable |
<interface configured for file transfer> |
Allow |
0 |
0 |
0 |
|
N+5 (QoE) |
<OVOC IP address> |
5000 |
32 |
0
|
0 |
tcp |
Enable |
<interface configured for QoE> |
Allow |
0 |
0 |
0 |
|
N+6 (QoE-secured) |
<OVOC IP address> |
5001 |
32 |
0 |
0 |
tcp |
Enable |
<interface configured for QoE> |
Allow |
0 |
0 |
0 |
|
N+7 (default - drop) |
0.0.0.0 |
0 |
0 |
0 |
65535 |
Any |
Disable |
-- |
Block |
0 |
0 |
0 |